Application Areas

应用领域

Priority applications: Friction Materials, Engineering Plastics (PA6), Construction Materials. Additional applications below.

优先应用:摩擦材料、工程塑料(PA6)、建筑材料。更多应用见下方。

Application 04

Plastic Compounding & Modification

塑料改性共混

Plastic compounding is the largest and most versatile application area for Calcium Sulfate Whisker. As a functional filler, CSW Fibers are studied by polymer compounders for the reinforcement and modification of thermoplastic resins including PP, PE, PA6, PA66, PBT, PVC, and ABS. The needle-like whisker morphology is investigated for its combined effect on reinforcement, dimensional stability and surface quality relative to conventional mineral fillers such as calcium carbonate, talc, and mica.

Reported effects of whisker-filled compounds include changes in warpage and shrinkage anisotropy, heat deflection temperature and surface finish. The extent of any such effect depends on the resin, loading level, compatibiliser and processing conditions, and must be confirmed on the customer's own formulation before use in automotive, electronics, consumer goods or industrial parts.

塑料改性共混是硫酸钙晶须最大且应用范围最广的领域。作为功能性填料,CSW晶须被改性塑料企业用于PP、PE、PA6、PA66、PBT、PVC、ABS等热塑性树脂的增强与功能化研究。针状晶须形态在增强、尺寸稳定性与表面质量方面的综合作用,是相对于碳酸钙、滑石粉、云母等传统矿物填料的研究方向。

文献报道中,晶须填充体系在翘曲与各向异性收缩、热变形温度及表面质量方面会发生变化。具体效果取决于树脂种类、添加量、相容剂与加工条件,用于汽车、电子、消费品及工业零件前,必须在客户自身的配方中加以确认。

Concept illustration of reinforced plastic pellets, filler powder and moulded parts
Illustrative concept image for plastic compounding applications. Not representative of actual Hancore composite testing results.塑料改性共混应用概念示意图,不代表汉科新材料实际的复合材料测试结果。

Technical Evaluation Areas by Resin

按树脂体系的技术评估方向

  • PP compounds — stiffness, warpage and shrinkage anisotropy at the trial loading levelPP 共混体系 — 试制添加量下的刚性、翘曲与各向异性收缩
  • PA6 / PA66 — tensile, flexural and heat-deflection responsePA6 / PA66 — 拉伸、弯曲与热变形温度的响应
  • PE compounds — rigidity and dimensional stabilityPE 共混体系 — 刚性与尺寸稳定性
  • PVC — rigidity, impact behaviour and surface qualityPVC — 刚性、冲击行为与表面质量
  • ABS — rigidity and shrinkage behaviourABS — 刚性与收缩行为
  • Loading levels, compatibiliser choice and line parameters must be established on the customer's own formulation and test programme添加量、相容剂选择与产线参数需在客户自身的配方与测试方案中确定

Material Properties Relevant to Compounding

与改性共混相关的材料特性

  • Needle-like whisker morphology — aspect ratio measured on the delivered batch针状晶须形态 — 长径比以实际交付批次的检测值为准
  • Density 2.69 g/cm³ — lower than common mineral fillers; coverage per kg to be compared in trial密度 2.69 g/cm³ — 低于常见矿物填料;单位重量覆盖效果需通过试制比较
  • Low Mohs hardness — abrasion potential on screws and barrels assessed on the customer's equipment莫氏硬度较低 — 对螺杆、机筒的磨损影响需在客户设备上评估
  • Surface finish and fibre blush — assessed on moulded plaques from the trial compound表面质量与纤维外露 — 通过试制料注塑样板评估
  • Processing on standard twin-screw lines — screw design and temperature profile to be confirmed可在标准双螺杆产线加工 — 螺杆组合与温度设定需确认
  • Cost balance versus glass-fiber or mineral-filled systems depends on resin, loading and line parameters与玻纤或矿物填充体系相比的成本平衡,取决于树脂、添加量与产线参数
Priority Application 02

Engineering Plastics Reinforcement

工程塑料增强改性

Calcium Sulfate Whisker is investigated as a reinforcing filler in engineering thermoplastics including PA6, PA66, PP, PBT, and PVC. Its needle-like crystal morphology gives a different reinforcement geometry from traditional fillers such as calcium carbonate or talc.

A micro-bridge structure within the polymer matrix is the mechanism most often discussed in the literature for whisker-filled systems, with reported effects on tensile strength, flexural modulus and heat deflection temperature. These outcomes depend on the resin, loading level, coupling system and processing route, and must be measured on the compound under evaluation.

硫酸钙晶须作为工程热塑性塑料(PA6、PA66、PP、PBT、PVC等)中的增强填料已被开展研究。其针状晶体结构与碳酸钙、滑石等传统填料呈现不同的增强几何形态。

文献中常以聚合物基体内部的微桥接结构来解释晶须填充体系的增强机理,相关报道涉及拉伸强度、弯曲模量与热变形温度的变化。实际结果取决于树脂、添加量、偶联体系与加工工艺,需在所评估的物料上实测确定。

Concept illustration of calcium sulfate whisker reinforced engineering plastic pellets and moulded parts
Illustrative concept image for engineering plastics applications. Not representative of Hancore's actual composite testing results.工程塑料应用概念示意图,不代表汉科新材料实际的复合材料测试结果。

Technical Evaluation Areas

技术评估方向

  • PA6 / PA66 compounds — tensile, flexural and heat-deflection responsePA6 / PA66 体系 — 拉伸、弯曲与热变形温度响应
  • PP compounds — stiffness and warpage behaviourPP 体系 — 刚性与翘曲行为
  • PVC compounds — impact behaviour and surface qualityPVC 体系 — 冲击行为与表面质量
  • PBT compounds — heat deflection and shrinkage behaviourPBT 体系 — 热变形温度与收缩行为
  • Loading level and coupling system to be established on the customer's formulation添加量与偶联体系需在客户配方条件下确定

Comparison Points for Trials

试制中的比较项目

  • Strength and stiffness per unit density versus mineral-filled references与矿物填充对照体系相比的单位密度强度与刚性
  • Warpage and shrinkage anisotropy on the actual part geometry在真实零件结构上的翘曲与各向异性收缩
  • Surface quality and fibre-blush behaviour表面质量与纤维外露情况
  • Abrasion on processing equipment versus the current filler system与现有填料体系相比的设备磨损情况
  • Cost balance versus glass-fiber reinforced systems, including compound and line parameters与玻纤增强体系相比的综合成本平衡(含物料与产线参数)
Application 05

3D Printing Materials

3D打印材料

Potential Applications in Polymer-Based Additive Manufacturing

在聚合物基增材制造中的潜在应用

Calcium Sulfate Whiskers (CSW) are engineered inorganic microfibers that may be investigated as functional reinforcement additives in polymer-based additive manufacturing materials.

For extrusion-based 3D printing systems, potential research areas include stiffness, dimensional stability, surface quality, and the influence of whisker dispersion on printing behavior. Actual performance depends on polymer selection, formulation, compounding conditions, and printing parameters.

Laboratory evaluation is recommended to assess filament processability, extrusion consistency, interlayer bonding, mechanical properties, and thermal behavior before application qualification.

硫酸钙晶须(CSW)是人工合成的无机微纤维,可作为聚合物基增材制造材料中的功能性增强添加剂加以研究。

对于挤出式 3D 打印体系,潜在的研究方向包括刚性、尺寸稳定性、表面质量,以及晶须分散性对打印行为的影响。实际性能取决于聚合物选择、配方设计、共混条件与打印参数。

在进行应用验证之前,建议通过实验室测试评估线材可加工性、挤出一致性、层间结合、力学性能与热行为。

Concept illustration of calcium sulfate whisker pellets in a glass dish with a whisker microstructure inset, a 3D printer producing a lattice vase, a printed gear and a printed lattice cube
Illustrative concept image for 3D printing applications. Not representative of actual Hancore composite testing results.3D打印应用概念示意图,不代表汉科新材料实际的复合材料测试结果。

Technical Evaluation Priorities

技术评估重点

  • Filament processability — how the compounded material behaves during filament production线材可加工性 — 共混材料在线材制备过程中的表现
  • Extrusion consistency — feed stability and flow behaviour during printing挤出一致性 — 打印过程中的进料稳定性与流动行为
  • Interlayer bonding — adhesion between deposited layers in the printed part层间结合 — 打印件沉积层之间的结合
  • Dimensional stability — shrinkage, warpage and tolerance retention of printed geometry尺寸稳定性 — 打印外形的收缩、翘曲与公差保持
  • Mechanical and thermal properties — strength, stiffness and heat response measured on printed specimens力学与热学性能 — 在打印样件上测定的强度、刚性与热响应

Grade note: HM003S is offered as a surface-treated grade. Its suitability for filament compounding must be confirmed against the customer's resin system, loading level and processing window; Hancore does not claim validated 3D printing performance for this grade. 型号说明:HM003S 为表面处理型产品。其是否适用于线材共混,需结合客户的树脂体系、添加量与加工窗口加以确认;汉科新材料未对该型号声称经过验证的 3D 打印性能。

Application 06

Automotive & New Energy Vehicles

汽车与新能源汽车

Potential Applications in Automotive Polymers

在汽车用聚合物中的潜在应用

Lightweighting and electrification have increased interest in alternative functional fillers for interior and under-hood thermoplastic parts. Calcium sulfate whisker (CSW) fibres are studied in the technical literature as an additive for polypropylene and engineering thermoplastics, where whisker-reinforced systems are reported to influence stiffness, dimensional stability and surface appearance.

Results of that kind depend on the resin system, loading level, compatibiliser, compounding route, moulding parameters and part geometry, so they must be established on the customer's own formulation and test programme. Areas of interest include door panels, instrument panels, battery enclosures, under-hood components and structural brackets.

轻量化与电动化趋势提高了人们对内饰及引擎盖下热塑性零件新型功能性填料的关注。在技术文献中,硫酸钙晶须(CSW)作为聚丙烯及工程热塑性塑料的添加剂已有相关研究,晶须增强体系据报道可影响刚性、尺寸稳定性与表面外观。

上述结果取决于树脂体系、添加量、相容剂、共混工艺、注塑参数与零件结构,因此必须在客户自身的配方与测试方案中加以确定。受关注的部件包括门板、仪表板、电池壳体、引擎盖下部件和结构支架。

Concept illustration of white polymer pellets in a glass dish with a whisker microstructure inset, a battery pack, a moulded automotive bracket and an electric vehicle
Illustrative concept image for automotive polymer applications. Not representative of actual Hancore composite testing results.汽车用聚合物应用概念示意图,不代表汉科新材料实际的复合材料测试结果。

Technical Evaluation Areas

技术评估方向(需客户验证)

Mechanical balance力学平衡
Stiffness and strength relative to the customer's unfilled or glass-filled baseline.与客户未填充或玻纤填充基准配方相比的刚性与强度表现。
Dimensional stability尺寸稳定性
Shrinkage and warpage behaviour in the actual part geometry and mould tooling.在真实零件结构与模具条件下的收缩与翘曲表现。
Processing window加工窗口
Dispersion, melt flow and cycle-time effects observed during compounding and moulding trials.共混与注塑试制过程中观察到的分散性、熔体流动及成型周期影响。
Service conditions服役条件
Response to heat, humidity and chemical exposure defined by the customer's application spec.对客户应用标准所规定的热、湿及化学接触环境的响应。

Scope: Application concept only. Hancore does not claim validated weight, mechanical, dimensional, surface or cost performance for automotive parts; all such figures must be determined by the customer on their own formulation and process. 适用范围:仅作为应用概念说明。汉科新材料未对汽车部件声称经过验证的减重、力学、尺寸、表面或成本表现;上述数据均需由客户在自身配方与工艺条件下测定。

Priority Application 01

Friction Materials

摩擦材料

In brake pads and clutch facings, CSW Fibers are studied as a multifunctional reinforcement in non-asbestos organic (NAO) and semi-metallic formulations. Interest focuses on the stability of the friction coefficient over the operating temperature range, and on the effect of a uniform contact surface on noise (NVH), counter-face wear and pad life.

在刹车片和离合器面片中,CSW晶须作为多功能增强体在无石棉有机(NAO)及半金属配方中被开展研究。研究重点在于摩擦系数在工作温度范围内的稳定性,以及均匀接触面对噪音(NVH)、对偶件磨损和片寿命的影响。

Concept illustration of a brake caliper, ventilated brake disc, brake pads and a dish of calcium sulfate whisker powder with a schematic fiber-structure inset
Illustrative concept image for friction materials applications. The fiber-structure inset is a schematic rendering, not a real micrograph, and the image is not representative of actual Hancore composite testing results.摩擦材料应用概念示意图。图中纤维结构为示意渲染,并非真实显微照片,不代表汉科新材料实际的复合材料测试结果。

Technical Evaluation Areas

技术评估方向

  • Friction coefficient stability across the operating temperature range工作温度范围内的摩擦系数稳定性
  • Fade and recovery behaviour at elevated temperature高温下的衰减与恢复行为
  • NVH (noise) response versus the reference formulation与对照配方相比的噪音(NVH)表现
  • Counter-face (disc / rotor) wear and scoring对偶件(盘/转子)磨损与拉伤
  • Pad service life under the applicable test protocol在相应测试规范下的摩擦片使用寿命
  • Formulation composition — asbestos-free and copper-free requirements per the regulations of the target market配方组成 — 需符合目标市场法规中的无石棉、无铜要求

Applicability: NAO and semi-metallic friction formulations. Loading levels and resulting behaviour must be established by formulation trials on the customer's test rig. 适用范围:无石棉有机(NAO)及半金属摩擦配方。添加量及相应表现需通过客户试验台架上的配方试制确定。

Application 07

Oil & Gas Drilling

油气钻探

Potential Applications in Drilling Fluids and Well Cementing

在钻井液与固井体系中的潜在应用

Calcium Sulfate Whiskers (CSW) are engineered inorganic microfibers with a high-aspect-ratio crystalline structure. Their potential use as functional additives in drilling fluids, lost-circulation formulations, and well-cementing systems may be explored through laboratory formulation studies.

The needle-like morphology of CSW offers a basis for investigating particle bridging, microstructural reinforcement, and crack-control mechanisms. However, performance depends on the fluid or cement formulation, operating temperature, salinity, and chemical compatibility.

硫酸钙晶须(CSW)是人工合成的无机微纤维,具有高长径比的晶体结构。其作为功能性添加剂在钻井液、堵漏材料配方和固井体系中的潜在用途,可通过实验室配方研究加以探索。

CSW 的针状形态为研究颗粒桥接、微观结构增强和裂缝控制机理提供了基础。但其性能取决于流体或水泥浆配方、作业温度、矿化度以及化学相容性。

Concept illustration of calcium sulfate whisker powder with a drilling rig and a cement core sample
Illustrative concept image for oil and gas drilling applications. Not representative of actual Hancore field testing results.油气钻探应用概念示意图,不代表汉科新材料实际的现场测试结果。

Technical Evaluation Areas

需评估的技术项目

Laboratory testing is required to assess dispersion, fluid compatibility, filtration behavior, mechanical properties, and performance under representative downhole conditions before any field application.

在任何现场应用之前,需通过实验室测试评估分散性、流体相容性、滤失行为、力学性能,以及材料在代表性井下工况下的表现。

  • Dispersion — particle distribution within the carrier fluid分散性 — 颗粒在载体流体中的分布
  • Fluid compatibility — interaction with cement and drilling-fluid systems流体相容性 — 与水泥浆及钻井液体系的相互作用
  • Filtration behavior — fluid-loss characteristics measured under test conditions滤失行为 — 在测试条件下测定的滤失特征
  • Mechanical properties — strength development within the hardened matrix力学性能 — 硬化基体中的强度发展
  • Downhole condition adaptability — response to temperature and salinity井下条件适应性 — 对温度和矿化度的响应

Application concept only. Hancore does not claim validated downhole performance or field qualification for HM003.

仅作为应用概念说明。汉科新材料未对 HM003 声称具备经过验证的井下性能或现场应用资质。

Priority Application 03

PVC Panels & Building Materials

PVC板材与建材

In PVC panel and profile extrusion, CSW Fibers are studied as a reinforcing filler for their possible effect on rigidity, impact resistance and dimensional stability of building material products. The whisker morphology gives a different reinforcement geometry from traditional calcium carbonate filling, while surface appearance remains an evaluation point for architectural applications.

Product areas of interest include PVC ceiling panels, wall cladding, window profiles, pipe fittings, WPC (wood-plastic composite) decking, and SPC (stone-plastic composite) flooring. Higher filler loading and its effect on mechanical performance and raw-material cost must be confirmed on the compound and line under evaluation.

在PVC板材和型材挤出中,CSW晶须作为增强填料被开展研究,关注点在于其对建材产品刚性、抗冲击性和尺寸稳定性可能产生的影响。晶须形态与传统碳酸钙填充呈现不同的增强几何特征,表面外观仍是建筑应用中的评估项目。

受关注的产品包括PVC天花板、墙板、窗框型材、管件、木塑复合(WPC)地板和石塑复合(SPC)地板。更高的填充量及其对力学性能和原材料成本的影响,需在实际物料与生产线上加以确认。

Concept illustration of PVC solid boards, hollow board cross-section and window profile with calcium sulfate whisker powder
Conceptual illustration of PVC boards and building materials. Not representative of Hancore-verified composite performance.PVC板材与建筑材料概念示意图,不代表汉科已验证的复合材料性能。

Technical Evaluation Areas

技术评估方向

  • Profile rigidity — flexural modulus measured on extruded profiles型材刚性 — 在挤出型材上测定的弯曲模量
  • Impact strength — compared with the CaCO₃-filled reference冲击强度 — 与碳酸钙填充对照体系比较
  • Surface quality — appearance and absence of filler marks on the customer's line表面质量 — 在客户产线上评估外观与填料痕迹
  • Heat deflection temperature — measured on the trial compound热变形温度 — 在试制物料上测定
  • Cost balance versus the virgin-resin formulation与纯树脂配方的成本平衡
  • Filler loading window — starting ranges to be confirmed by trial填充量范围 — 起始用量需通过试制确认

Grade note: HM003 is the standard grade referenced for PVC compounds. Suitability of HM003S for WPC/SPC flooring systems requires confirmed parameters and trial data.

型号说明:PVC物料参考的标准型号为HM003。HM003S是否适用于木塑/石塑地板体系,需以确认后的技术参数和试制数据为依据。

Find the Right Solution for Your Application

为您的应用找到合适的解决方案

Our application engineers can help optimize CSW Fiber selection and formulation for your specific needs.

我们的应用工程师可以帮助您优化硫酸钙晶须的选型和配方,满足您的特定需求。

Talk to an Engineer → 咨询工程师 →