CSW Fibers Product Range

硫酸钙晶须全系列产品

Complete Calcium Sulfate Whisker solutions for every application requirement

硫酸钙晶须全系列产品解决方案

Specifications
参数

Technical Parameter Table

完整技术参数表

Complete technical specifications for all CSW Fiber grades

所有型号硫酸钙晶须完整技术参数

Parameter参数 Unit单位 HM003 HM003S Reference Method参考检测方法
Chemical Formula化学式 — CaSO₄ CaSO₄ —
Crystal Form晶型 — Whisker晶须 Whisker晶须 XRD
Purity纯度 % ≥98 To be confirmed待确认 ICP-OES
Whiteness白度 % ≥95 To be confirmed待确认 GB/T 5950
Diameter直径 μm 1 – 4 To be confirmed待确认 SEM
Length长度 μm 10 – 300 To be confirmed待确认 SEM
Aspect Ratio长径比 — 40 – 80 To be confirmed待确认 SEM
Density密度 g/cm³ 2.69 To be confirmed待确认 GB/T 16913
Mohs Hardness莫氏硬度 — 2 – 4 To be confirmed待确认 —
Heat Resistance耐热温度 °C ≥1000 (whisker material only)(仅晶须材料本体) To be confirmed待确认 TGA
Melting Point熔点 °C 1450 To be confirmed待确认 —
Surface Treatment表面处理 — None无 Surface-treated (agent specification to be confirmed)表面处理型(处理剂规格待确认) —
Moisture Content含水率 % <1.5 To be confirmed待确认 GB/T 5211
pH ValuepH值 — 6 – 7 To be confirmed待确认 GB/T 5211
Bulk Density堆积密度 g/L 0.25 – 0.40 To be confirmed待确认 GB/T 16913
Loose Bulk Density松装密度 g/cm³ 0.3 – 0.65 To be confirmed待确认 GB/T 16913
Fineness细度 mesh ≤80 To be confirmed待确认 Sieve analysis
Refractive Index折射率 — 1.585 To be confirmed待确认 —
Tensile Modulus拉伸模量 GPa 178 To be confirmed待确认 —

HM003S data status: this grade has no independently confirmed Hancore test dataset yet. Its indicators are shown as "To be confirmed" and are not copied from HM003; they will be published once the grade's own QC report or TDS is released. The Reference Method column names the method conventionally used for each indicator; the method actually applied to a given lot is the one stated on that lot's QC report, so please confirm with us before quoting a method in your own specification.

HM003S 数据状态:该型号目前没有经独立确认的Hancore测试数据,其指标一律标注"待确认",未沿用HM003的数值;待该型号自身QC报告或TDS发布后填写。"参考检测方法"列给出该指标通常采用的检测方法;某一具体批次实际使用的检测方法以该批次QC报告为准,请在写入贵方规格书前与我方核对。

Product Models
产品型号

Choose Your Grade

产品型号详情

Select the ideal CSW grade for your application

选择适合您应用的晶须型号

HM003

Standard Grade

标准型

Our flagship product for general-purpose reinforcement and modification. Excellent balance of performance and cost-effectiveness across a wide range of applications.

通用增强改性的旗舰产品,性能与成本的最佳平衡。

  • Purity ≥98%, Whiteness ≥95%
  • Aspect ratio 40-80, ideal for bulk filling and reinforcement
  • Compatible with PA, PP, PVC, PE, and other thermoplastics
  • Typical trial window: 5-30 wt%, set by your target properties
  • Packaging: 12.5 kg bags, 500kg bulk bags
  • 纯度≥98%,白度≥95%
  • 长径比40-80,适合大量填充和增强
  • 兼容PA、PP、PVC、PE等热塑性塑料
  • 常见试制区间:5-30 wt%(按目标性能确定)
  • 包装:12.5 kg袋装,500kg吨袋
HM003S

Surface-Treated Grade

表面处理型

Surface-treated grade of the CSW Fiber range. The treatment is intended to improve wetting and dispersibility in polymer matrices; the treatment specification and measured effects for this grade are still being confirmed.

CSW晶须系列的表面处理型。表面处理用于改善在聚合物基体中的润湿与分散;该型号的处理规格与实测效果仍在确认中。

  • Surface-treated grade — treatment agent and dosage: to be confirmed
  • Purity, whiteness, diameter, length and aspect ratio: to be confirmed (not taken from HM003)
  • Intended evaluation area: dispersion and interfacial bonding in polymer matrices
  • Recommended for side-by-side trials against HM003 on your own resin and line
  • Application suitability (engineering plastics, filaments, etc.) to be established by trial
  • 表面处理型——处理剂种类与用量:待确认
  • 纯度、白度、直径、长度、长径比:待确认(未沿用HM003数值)
  • 预期评估方向:在聚合物基体中的分散性与界面结合
  • 建议在客户自身树脂与产线上与HM003平行试制
  • 应用适用性(工程塑料、线材等)需通过试制确立
Custom

Custom Grades

定制型

Tailored specifications to match your unique application requirements. Our R&D team works directly with you to develop the optimal CSW solution.

根据您的需求定制规格,研发团队直接对接开发最优方案。

  • Custom particle size distribution
  • Specialized surface treatments (titanate, aluminate, etc.)
  • Pre-compounded masterbatch available
  • Custom packaging and labeling
  • Minimum order: 500kg for custom grades
  • 定制粒度分布
  • 专业表面处理(钛酸酯、铝酸酯等)
  • 可提供预混母粒
  • 定制包装和标签
  • 定制型最低起订量:500kg
Packaging & Storage
包装与储运

Packaging and Handling

包装与储运信息

Packaging options and storage guidelines for CSW products

硫酸钙晶须产品包装与储运指南

📦

Standard Packaging

标准包装

Small orders: 12.5 kg multi-wall paper bags with PE liner
Bulk orders: 500kg / 1000kg jumbo bags (FIBC)
Container load: 20-25 MT per 20ft container

小订单:12.5 kg多层纸袋内衬PE膜
大订单:500kg/1000kg吨袋
整柜装载:20尺柜可装20-25吨

🏭

Storage Conditions

储存条件

Store in a cool, dry, well-ventilated area. Keep away from moisture and direct sunlight. Shelf life: 24 months in original sealed packaging.

存放于阴凉干燥通风处,远离潮气和阳光直射。原装密封包装保质期24个月。

🚢

Shipping

运输

Non-hazardous material. Can be shipped by sea, air, or land transport. MSDS available upon request. Lead time: 7-15 days for standard grades, 20-30 days for custom grades.

非危险品,可海运、空运或陆运。可提供MSDS。标准型交期7-15天,定制型20-30天。

Need a Custom Solution?

需要定制方案?

Our technical team can develop tailored CSW grades for your specific requirements.

我们的技术团队可为您的具体需求开发定制晶须产品。

Request Custom Quote → 获取定制报价 →